2004 Mazda Bongo Friendee

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive coil spring (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt split (2.1.3 (g) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated both split (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive coil spring (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt split (2.1.3 (g) (i))

Nearside Front Seat belt not functioning as intended not locking until limit of travel reached (7.1.2 (c))

Nearside Headlamp lens seriously defective excessively affecting beam pattern (4.1.1 (b) (ii))

Offside Front Seat belt not functioning as intended not locking until limit of travel reached (7.1.2 (c))

Offside Headlamp lens seriously defective excessively affecting beam pattern (4.1.1 (b) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive coil spring (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt split (2.1.3 (g) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated both split (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive coil spring (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt split (2.1.3 (g) (i))

Both rear bump stops missing,

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Play in steering rack inner joint(s) ()

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front inner (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Fog lamp not working

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front inner (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Front (5.3.4 (a) (i))

Offside Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Upper and Lower (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Upper and Lower (5.3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front inner (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Fog lamp not working

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front inner (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Front (5.3.4 (a) (i))

Offside Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner panel (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear axle trailing arm front bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Headlamp incorrect colour (4.1.4 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner panel (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear axle trailing arm front bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced main chassis leg (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outrigger/rear cross member (6.1.1 (c) (i))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Vehicle structure is fractured but structural rigidity is not significantly reduced above rear coil spring (6.1.1 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Child Seat fitted not allowing full inspection of adult belt Offside rear ()

Offside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside front fog light in/op

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust system secure but centre exhaust mounting broken away from exhaust pipe

Nearside Headlamp aim too low (1.8)

Nearside Inner Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)