2002 Piaggio Vespa

Front Brake lever worn, but not excessively (1.1.15 (b))

Central Lower Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Headlamp aim too low (4.1.2 (a))

Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Offside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake lever worn, but not excessively (1.1.15 (b))

Lower Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Road spring corroded (5.3.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Road spring corroded (5.3.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Road spring corroded (5.3.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Road spring corroded (5.3.1 (b) (i))

Steering operation restricted in free movement from lock to lock (2.1.4 (c))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))