2012 Vauxhall Insignia

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake disc significantly and obviously worn both rear (1.1.14 (a) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust silencer insecure and rear section missing (8.1.1 (b) (i))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension rod corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension rod corroded and seriously weakened (5.3.3 (b) (i))

Rear Registration plate inscription missing (0.1 (b))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

corrosion noted to underside suspension components not considered excessive

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Exhaust system insecure tail pipe (6.1.2 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Exhaust mounting defective centre section (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Front Exhaust mounting defective (6.1.2 (a))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Exhaust mounting defective at front pipe (6.1.2 (a))

Offside Front Service brake lagging in operation (1.2.1 (d))

Exhaust mounting defective at front pipe (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened inner faces (1.1.14 (a) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Radiator /cooling fans insecure.Lower brackets both broken.

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Radiator /cooling fans insecure.Lower brackets both broken.

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing abnormal wear partial casing failure (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing abnormal wear partial casing failure (5.2.3 (d) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Anti-roll bar has slight play in a pin/bush drop link (2.4.G.2)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Anti-roll bar has slight play in a pin/bush drop link (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)