2006 Mazda 2

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Position lamp likely to become detached (4.2.1 (c) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Body not fully secure (6.2.2 (a) (i))

Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged (5.2.3 (d) (ii))

Rear Body not fully secure (6.2.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Front Body not fully secure (6.2.2 (a) (i))

Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged (5.2.3 (d) (ii))

Rear Body not fully secure (6.2.2 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear reflector missing (4.8.2 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Rear tyre wall has some cuts and scrapes

Nearside Front Nail in tyre nail on outer edge

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

offside rear tyre is perished

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

offside front tyre wearing on inner edge

Offside Headlamp not working on dipped beam (1.7.5a)

offside front tyre wearing on inner edge

near side front tyre has multiple kuts in side wall

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

near side front tyre has multiple kuts in side wall