2004 Ford Focus C-max

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a major leak of exhaust gases front flexi (6.1.2 (a))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush excessively worn bottom arm rear bush (5.3.4 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

exhaust heat sieild loose

Nearside Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Windscreen washer not working (3.5 (a))

exhaust heat sieild loose

Nearside Front Suspension arm pin or bush excessively worn bottom arm rear bush (5.3.4 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner edge (4.1.D.1a) DANGEROUS

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)