MOT Status
ValidMileage
124,616 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim unable to be tested Bulb insecure (4.1.2 (b))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both fronts (2.4.G.2)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
registration plate delaminated but not likely to be misread front and rear (6.3.1d)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both fronts (2.4.G.2)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
registration plate delaminated but not likely to be misread front and rear (6.3.1d)
Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both fronts (2.4.G.2)
Tyre worn close to the legal limit both fronts (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear rear brake binding (3.7.B.1)
Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both fronts (2.4.G.2)
Tyre worn close to the legal limit both fronts (4.1.E.1)
Brake pipe slightly corroded both rears (3.6.B.2c)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)
Offside Brake pipe excessively corroded front to rear (3.6.B.2c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Headlamp aim too high (1.8)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Temporary fuel cap fitted
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LS08 BHP is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying LS08 BHP, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LS08 BHP?
You can check the full history of LS08 BHP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LS08 BHP registered?
LS08 BHP is a 2008 Toyota Aygo, first registered on 27 March 2008.
Is LS08 BHP safe to buy?
The MOT history for LS08 BHP shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LS08 BHP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LS08 BHP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.