2009 Chevrolet Matiz

Front Headlamp not working on dipped beam both (4.1.1 (a) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust mounting defective front behind flexi broken (6.1.2 (a))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction items hanging from mirror (3.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake grabbing severely (1.2.1 (c))

Nearside Rear Upper Shock absorbers likely to become detached (5.3.2 (a) (ii)) DANGEROUS

Offside Rear Upper Shock absorbers likely to become detached (5.3.2 (a) (ii)) DANGEROUS

Exhaust mounting defective front behind flexi broken (6.1.2 (a))

Front Service brake fluctuating, but not excessively discs corroded (1.2.1 (e))

Oil leak, but not excessive oil filter (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers has an excessively worn bush TOP MOUNTING (5.3.2 (c))

Offside Front Shock absorbers has an excessively worn bush TOP MOUNTING (5.3.2 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate inscription illegible (0.1 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension component pin or bush excessively worn SHOCK ABSORBER TOP MOUNTING (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension component pin or bush excessively worn SHOCK ABSORBER TOP MOUNTING (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Brakes imbalanced across an axle (3.7.B.5b)

Nearside rear brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Car has sideskirts obstructing some bodywork

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear wiper blade split

Car has sideskirts obstructing some bodywork

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Headlamp aim too high (1.8)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear wiper blade split