2006 Ford Ka

Nearside Front Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting body under car marked yellow (6.2.2 (d) (i))

Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting door sill marked yellow (6.2.2 (d) (i))

Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch marked yellow (6.2.2 (d) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both rear (4.7.1 (b) (ii))

Nearside Front Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement arm bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement arm bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure + wearing uneven (5.2.3 (d) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Macpherson strut pin or bush worn but not resulting in excessive movement Top Mount (5.3.4 (a) (i))

Rear Registration plate insecure but not likely to fall off (0.1 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear rear number plate cracked

Central Rear rear number plate cracked

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Stop lamp not working (1.2.1b)

Nearside Rear badly cracked and perished

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose excessively damaged (3.6.B.4d)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Offside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

advise front(both sides)brake discs pitted inner surface

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

advise front(both sides)brake discs pitted inner surface

All position lamps not working (1.1.A.3b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)