2008 Honda Civic

Rear Bumper Slightly Loose / Dented

Rear Sub-frame pin or bush worn but not resulting in excessive movement Front Bush Both Sides (5.3.4 (a) (i))

Exhaust shield insecure

Front Anti-roll bar ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame pin or bush worn but not resulting in excessive movement front bush both sides (5.3.4 (a) (i))

Front Position lamp not working both sides (4.2.1 (a) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust shield insecure

Front Anti-roll bar ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame pin or bush worn but not resulting in excessive movement front bush both sides (5.3.4 (a) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect misting (5.3.2 (b))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Bumper mountings corroded but not likely to become detached Panels in complete ,but likely to cause harm or fall off at time of inspection (6.1.4 (a) (i))

Offside Rear Bumper mountings corroded but not likely to become detached Panels in complete ,but likely to cause harm or fall off at time of inspection (6.1.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak oil leaking over drive shaft, (5.3.2 (b))

Offside Rear Exhaust system insecure weld broke on pipe to mount offside rear silencer 1 of 2 mounts (6.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust shield missing where fitted as original equipment creating a risk of fire heat shield hanging down,broke from mounts ,and likely to fall off.not fitted in correct position as original fitment (6.1.3 (e)) DANGEROUS

Nearside Front Bumper mountings corroded but not likely to become detached Panels in complete ,but likely to cause harm or fall off at time of inspection (6.1.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Bumper mountings corroded but not likely to become detached Panels in complete ,but likely to cause harm or fall off at time of inspection (6.1.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Child Seat fitted not allowing full inspection of adult belt ()

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim too low (1.8)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)