2012 Vauxhall Vivaro

Front Windscreen damaged but not adversely affecting driver's view windscreen stone chipped (3.2 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear under vehicle undersealed

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

chip to windscreen

n/s front tyre worn on edges on 2.5m

o/s front tyre worn on inner edge on 2.5m

o/s rear brake back plate corroded

o/s rear tyre on 3m

oil leak

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

both rear brake discs corroding

chip to windscreen

n/s front tyre worn on edges on 2.5m

o/s front tyre worn on inner edge on 2.5m

o/s rear brake back plate corroded

o/s rear tyre on 3m

oil leak

slight handbrake travel

warning message showing on dashboard

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brake pad(s) wearing thin Brake pads low/overheated and rear brake discs overheated (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brake pad(s) wearing thin Brake pads low/overheated and rear brake discs overheated (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

high level stop light not working

n/s front headlight slightly out of focus

n/s rear tyre on 3m

slight play to front sub frame bushes

Front Suspension arm ball joint excessively worn both (5.3.4 (a) (i))

Front Windscreen washer provides insufficient washer liquid both (3.5 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

high level stop light not working

n/s front headlight slightly out of focus

n/s rear tyre on 3m

slight play to front sub frame bushes

n/s dip beam slightly out of focus

Nearside Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Windscreen wiper not working (3.4 (a))

n/s dip beam slightly out of focus

suspect rear seats not mounted correctly

Rear Registration plate does not conform to the specified requirements (0.1 (d))

suspect rear seats not mounted correctly

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick both (3.5.1g)