2003 Mercedes-benz Vito

body corroded and holed

body coroded

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

nearside rear tyre perished and cracking

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

near side rear tyre sidewalls cracking

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

o/s/ sill damaged

under front shows signs of a fuel leak

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Parking brake lever has no reserve travel (3.1.6b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Oil leak

gear lever count weight bush worn

handbrake high travel

o/s/side door lock missing

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Stop lamp not working (1.2.1b)

Nail in offside rear tyre

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Horn not working (1.6.2a)

Offside Stop lamp not working (1.2.1b)

Rear Brake pad(s) wearing thin (3.5.1g)