2003 Peugeot Partner

Brake pedal spongy (3.3.B.1b)

Indicator switch faulty (1.4.A.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Obligatory mirror insecure (8.1.1)

Offside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside front brake binding (3.7.B.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

engine drive belt excessively perished

exhaust mounting hanger missing

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

engine drive belt excessively perished

exhaust mounting hanger missing

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Side repeater missing (1.4.A.2b)

Offside Front coil spring incomplete (2.4.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)

Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)