2006 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing near top mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill return (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill return (5.3.6 (a) (i))

Nearside Rear Tyre has ply or cords exposed inner sidewall (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed inner edge (5.2.3 (d) (ii)) DANGEROUS

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

corrosion around fuel filler neck

CORROSION ON UNDERSIDE OF VEHICLE

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

CORROSION ON UNDERSIDE OF VEHICLE

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Nearside Front Brake hose twisted (3.6.B.4c)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Suspension component mounting prescribed area is corroded but not considered excessive both outer sills (2.4.A.3)

Different size tyres fitted from front to rear axles

Nearside Headlamp aim too low (1.8)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Different size tyres fitted from front to rear axles

Nearside front tyre worn on inner edge

Anti-lock braking system warning lamp does not illuminate (3.4.1b)

Nearside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear All position lamps not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Speedometer clearly inoperative (6.7.2)

front brake discs badly worn and corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake performance not tested (3.7.A.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front tyres wearing on edges

offside front lower suspension arm rear bush unbonding

reverse light switch broken causing oil to leak from gearbox recommend do not drive