2010 Toyota Auris

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

exhaust mount detached

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

exhaust mount corroded

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

exhaust mount corroded

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust mount broken

Front pads and discs worn

exhaust mounts

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front pads and discs worn

exhaust mounts

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust mounting defective Both central. (6.1.2 (a))

Front Items removed from driver's view prior to test Bracket attached to windscreen.

Nearside Brake pipe corroded, covered in grease or other material Front to rear. (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear. (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Light heavily condensated.

Exhaust mounting defective Both central. (6.1.2 (a))

Front Items removed from driver's view prior to test Bracket attached to windscreen.

Nearside Brake pipe corroded, covered in grease or other material Front to rear. (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear. (1.1.11 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Light heavily condensated.

Central Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear damp in lamp but not effecting lights

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Rear Exhaust mounting defective (6.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Nearside Rear damp in lamp but not effecting lights

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Bonnet cannot be secured in the closed position (8.4.1)

Front registration plate missing (6.3.1a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)