MOT Status
ValidMileage
170,905 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a minor leak of exhaust gases Flexi (6.1.2 (a))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s (6.2.2 (d) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Bumper slightly insecure
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pump has slight seepage (2.1.5 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s trailing arm mount area (6.2.2 (d) (i))
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Bumper slightly insecure
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Exhaust emits blue smoke during acceleration (8.2.1.2 (g))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Bumper slightly insecure
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))
Front Play in steering rack inner joint(s) ()
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Subframe and suspension arms (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s inner sills (5.3.6 (a) (i))
Brake disc worn, pitted or scored, but not seriously weakened Front and rear (1.1.14 (a) (ii))
Brake pad(s) wearing thin Front and rear (1.1.13 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Suspension component mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s trailing arm mount area (5.3.6 (a) (i))
Rear Suspension spring mounting prescribed area damaged but not considered excessive n/s & o/s (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive n/s & o/s sills (7.1.1 (a) (i))
engine cover fitted
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure also perished. (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Dayime running lamps missing
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
emission past
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Daytime running lamp missing (4.2.1 (a))
Offside Front Daytime running lamp missing (4.2.1 (a))
Offside Front Undertray insecure underwing trim (8.1.1 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
emission past
Oil leak ()
Front position lamp(s) not working both (1.1.A.3b)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Oil leak ()
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Outer Rear Brake pad(s) wearing thin (3.5.1g)
registration plate deteriorated but not likely to be misread (6.3.1d)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LT61 YCB is a 2011 Mazda 3 in White with a 1,560cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2011 Mazda 3 models, the average MOT pass rate is 77.9% with a typical mileage of 64,021 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying LT61 YCB, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 15 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LT61 YCB?
You can check the full history of LT61 YCB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LT61 YCB registered?
LT61 YCB is a 2011 Mazda 3, first registered on 2 September 2011.
Is LT61 YCB safe to buy?
The MOT history for LT61 YCB shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LT61 YCB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LT61 YCB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.