2015 Mazda Bongo Friendee

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch & Outer sill (5.3.6 (a) (i))

Offside Front Outline marker lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch & Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Oil leak, but not excessive Rocker covers (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Coolant leak ()

Nearside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front (6.1.1 (c) (i))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Brake fluid warning lamp illuminated (1.1.10 (f))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing outer sidewalls perished (5.2.3 (d) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing outer sidewalls perished (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both D bushes (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both nearside and offside (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both nearside and offside (1.1.14 (a) (ii))

Front Headlamp aim projected beam image is obviously incorrect Both nearside and offside lenses heavily deteriorated (4.1.2 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened Both nearside and offside (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both nearside and offside (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt nearside and offside (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Stop lamp not working (1.2.1b)

Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt nearside and offside (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

nearside rear crossmember corroded not prescribed area, offside rear floor corroded not holed

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

nearside rear crossmember corroded not prescribed area, offside rear floor corroded not holed