2002 Honda NSR125

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Horn not working (7.7 (a))

Nearside Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Steering headbearing has excessive free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Steering headbearing has slight free play (2.2.2)

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

fairing damaged and insecure

slight movement in front floating disc

Front Brake caliper(s) securing bolt(s) loose (3.2.A1j)

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

fairing damaged and insecure

slight movement in front floating disc

Direction indicators not working (1.5.1c)

Front Throttle operating incorrectly (6.2.1f)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear reflector on motorcycle missing (1.4.1)

Front Front shock absorber seal failed and leaking oil (2.3.3)