MOT Status
ExpiredMileage
92,796 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both lower (2.4.G.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake servo vacuum pipe deteriorated (3.6.C.1b)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front front brake binding (3.7.B.1)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Centre Rear Statutory seat belt missing (5.1.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside front brake binding (3.7.B.1)
front brake application uneven (3.7.B.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Front Windscreen wiper blade insecure (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LV03 MHF is a 2003 Mazda Demio in Silver with a 1,498cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2003 Mazda Demio models, the average MOT pass rate is 74.7% with a typical mileage of 51,132 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying LV03 MHF, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 23 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LV03 MHF?
You can check the full history of LV03 MHF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LV03 MHF registered?
LV03 MHF is a 2003 Mazda Demio, first registered on 21 March 2003.
Is LV03 MHF safe to buy?
The MOT history for LV03 MHF shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LV03 MHF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LV03 MHF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.