2009 Mercedes-benz Vito

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Anti-roll bar linkage ball joint excessively worn both (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

rear differential slightly oil leak

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

rear axle slight oil leak

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

engine and rear axle oil leak

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine oil level low.

Offside Headlamp aim too high (1.8)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nail in offside rear tyre

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nail in offside rear tyre

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside rear tyre has cut but not deep enough to reach ply or cords

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

offside rear tyre has cut but not deep enough to reach ply or cords