2007 Audi A4

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Manufactures body covers installed underneath vehicle restricting visual inspection.

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

rear sub frame and arms corroded

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside wing damaged

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

rear sub frame and arms corroded

under side of vehicle coated in under seal restricting inspection of body/chassis and pipes

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside wing damaged

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

rear sub frame and arms corroded

under side of vehicle coated in under seal restricting inspection of body/chassis and pipes

Manufactures engine and body covers fitted restricting full inspection

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

eml light on

Manufactures engine and body covers fitted restricting full inspection

Nearside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

eml displayed on dash

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

manufactures sill and body covers fitted restricting inspection

nearside rear brake slow to increase and degrease

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Child seat fitted nearside & offside rear not allowing full inspection of adult seat belt

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

under trays fitted obscuring some underside components

Child seat fitted nearside & offside rear not allowing full inspection of adult seat belt

Offside Headlamp insecure (1.7.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

under trays fitted obscuring some underside components

Nearside Rear Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside rear brake application uneven (3.7.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

rear pads are low