2008 Honda Civic

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch axle mount (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust system insecure OSF SILL/EXHAUST MOUNT (6.1.2 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Shock absorbers has a reduced damping effect both sides (5.3.2 (d))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced corrosion to sills both side , underbody and suspension components (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

o/s/r tyre on 3mm