2002 Subaru Forester

Nearside Front Anti-roll bar attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear subframe showing signs of corrosion

beam image poor

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear subframe showing signs of corrosion

beam image poor

Brake pedal wearing smooth (1.1.2 (c))

rear subframe showing sings of corrosion

slight blow at centre exhaust

Brake pedal wearing smooth (1.1.2 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

rear subframe showing sings of corrosion

slight blow at centre exhaust

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Tyre worn close to legal limit/worn on edge (5.2.3 (e))

beam image poor

front and rear anti roll, link bushes have some play

pedal rubber worn

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Tyre worn close to legal limit/worn on edge (5.2.3 (e))

beam image poor

front and rear anti roll, link bushes have some play

pedal rubber worn

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Exhaust system insecure and blowing (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Towball/hitch not fitted at time of test ()

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Towball/hitch not fitted at time of test ()

Offside Rear Stop lamp not working (1.2.1b)

all tyres wearing low and cracking on sidewalls

segment missing from eye level brake light

small chip on winscreen

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working number plate light not working (1.1.C.1d)

all tyres wearing low and cracking on sidewalls

segment missing from eye level brake light

small chip on winscreen

segment missing from eye level brake light

small stone chips on screen

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight play in rear anti-roll bar linkage bushes

surface corrosion to rear subframe

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight play in rear anti-roll bar linkage bushes

surface corrosion to rear subframe

engine mgt light on

exhaust back box in poor condition and leaking slightly

offside front driveshaft inner boot slightly perished

rear exhaust outer case corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Statutory seat belt missing (5.1.1)

Offside Stop lamp not working (1.2.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Stop lamp not working (1.2.1b)

Tyre worn close to the legal limit (4.1.E.1)