2004 Mercedes-benz Vito

Brake disc worn, pitted or scored, but not seriously weakened all positions (1.1.14 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened all positions (1.1.14 (a) (ii))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Exhaust system insecure rubbers (6.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Side repeater incorrect colour (4.4.3 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Play in steering rack inner joint(s) ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Play in steering rack inner joint(s) ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Fuel system component leaking excessively or a risk of fire engine (6.1.3 (b) (ii)) DANGEROUS

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

Front Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

front wiper blades split

spare wheel carrier has a bolt missing

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Registration plate lamp insecure (1.1.C.1c)

Nearside Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

front wiper blades split

spare wheel carrier has a bolt missing