2012 Kia Optima

Nearside Front Lower Suspension arm corroded but not seriously weakened arm has heavy surface corrosion (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened arm has heavy surface corrosion (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms and components have heavy surface corrosion (5.3.3 (b) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Parking (secondary brake) on a single line braking system grabbing severely (1.3.1 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened damage from overheating (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened arm has heavy surface corrosion (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened is showing evidence of over heating (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened damage from overheating (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm corroded but not seriously weakened arm has heavy surface corrosion (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms and components have heavy surface corrosion (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively signs of getting hot. (1.2.1 (f))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Service brake binding but not excessively signs of getting hot. (1.2.1 (f))

vehicle very reluctant to start,emissions not smelling correct,diesel knock when revved.

Nearside Front Service brake fluctuating, but not excessively slght (1.2.1 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

hand brake readings lower than previous test most likely due to shoes bedding in to new discs.

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Service brake fluctuating, but not excessively slght (1.2.1 (e))

Nearside Rear Brake pad(s) wearing thin may be less when checked with wheel off (1.1.13 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Electronic stability control warning lamp indicates a fault (7.12 (e))

front tyre's wearing on edges

both rear tyre's worn on inner edges and cracking

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

front tyre's wearing on edges

both rear tyre's worn on inner edges and cracking

both rear tyre's worn on inner edges and cracking

both rear tyres wearing on inner edges and cracking slightly