2003 Mitsubishi Shogun

Nearside Front Service brake binding but not excessively (1.2.1 (f))

outer sills covered

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

outer sills covered

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement hub bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch in 3 places (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement hub bush (5.3.4 (a) (i))

underside undersealed

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

heavy corrosion to all underside of vehicle

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material before brake flexi hose (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

front and rear inner wheel arches starting to corrode

nearside and offside rear upper suspension arm front bushes have slight wear

offside inner sill starting to corrode

rear seats removed from boot at time of test

rear wheels tilting in at the top but nothing damaged or bent

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material before brake flexi hose (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

front and rear inner wheel arches starting to corrode

nearside and offside rear upper suspension arm front bushes have slight wear

offside inner sill starting to corrode

rear exhaust deteriorating

rear seats removed from boot at time of test

rear wheels tilting in at the top but nothing damaged or bent

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper arm front bush getting worn

Offside Rear Upper arm front bush getting worn

Rear seats removed in boot at time of test.

Rear tyres wearing on inner edges and wheels look like they are tipped in at the top but cant see nothing bent

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper arm front bush getting worn

Offside Rear Upper arm front bush getting worn

Rear seats removed in boot at time of test.

Rear tyres wearing on inner edges and wheels look like they are tipped in at the top but cant see nothing bent

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front inner wheel arches starting to corrode

front inner wheel arches/chassis corroding

offside rear wheel arch corroding

rear heater coolant pipe corroding

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside rear brake binding (3.7.B.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front inner wheel arches starting to corrode

front inner wheel arches/chassis corroding

offside rear wheel arch corroding

rear heater coolant pipe corroding

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Inner Tyre worn close to the legal limit very worn (4.1.E.1)

could do with a wax oil

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)