MOT Status
ExpiredMileage
77,611 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust back box hanger broken but system still adequately supported
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Exhaust back box hanger broken but system still adequately supported
Front tyres worn on outer shoulders
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Fluid contamination on brake servo no visable leaks
Nearside Front position lamp(s) not working (1.1.A.3b)
Fluid contamination on brake servo no visable leaks
Engine covers fitted obscuring some components in the engine bay
Nail in nearside rear tyre
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LY05 KVG is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 72.7%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying LY05 KVG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LY05 KVG?
You can check the full history of LY05 KVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LY05 KVG registered?
LY05 KVG is a 2005 Mazda 6, first registered on 31 May 2005.
Is LY05 KVG safe to buy?
The MOT history for LY05 KVG shows 11 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LY05 KVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LY05 KVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.