MOT Status
ValidMileage
74,269 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all metal brake pipes are corroded (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive engine bay near top spring mounting (5.3.6 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced centre outrigger (6.1.1 (c) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive lower arm mounting area (5.3.6 (a) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material all metal brake pipes are corroded (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive engine bay near top spring mounting (5.3.6 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced centre outrigger (6.1.1 (c) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive lower arm mounting area (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material Pipe corroded (1.1.11 (c))
Nearside Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material Pipe corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced Rear crossmember corroded (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Front Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Tyre worn close to legal limit/worn on edge all 4 getting low (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear light unit is cracked
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
brake pedal soft
nearside rear tyre cracked and cut on sidewalls
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside rear brake grabbing slightly (3.7.A.5b)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
front brake discs worn
rear brake discs slightly corroded
nearside rear brake disc requires attention
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake hose excessively deteriorated (3.6.B.4d) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside front brake grabbing slightly (3.7.A.2b)
Offside rear brake grabbing slightly (3.7.A.5b)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LY52 EAE is a 2002 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 71.4%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying LY52 EAE, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LY52 EAE?
You can check the full history of LY52 EAE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LY52 EAE registered?
LY52 EAE is a 2002 Mercedes-benz Vito, first registered on 25 November 2002.
Is LY52 EAE safe to buy?
The MOT history for LY52 EAE shows 28 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LY52 EAE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LY52 EAE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.