2003 Honda CB500

Nearside Front bolt missing

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Motorcycle structure is fractured and structural rigidity is significantly reduced screen (6.1.1 (a) (i))

Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Nearside Front bolt missing

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Clutch lever shortened (6.2.7 (b))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Exhaust slightly loose (6.1.2 (a))

Riders seat with a defective supporting structure does not lock down (6.2.5 (a) (i))

Steering headbearing excessively stiff or notchy notchy (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm (6.1.1 (c) (i))

Nearside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Nearside Shock absorber has a light misting of oil (5.3.2 (b))

Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front suspension lightly rubbing not affecting the movement of the suspension (2.3.6a)

Exhaust mounting deteriorated. (7.1.1.c)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii)) DANGEROUS

Drive chain slightly loose (6.2.1d)

Exhaust mounting deteriorated. (7.1.1.c)

Front Tyre valve stem slightly damaged (4.1.2c)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake pedal cannot be released smoothly (3.1.3d)

The front & rear calipers pistons are not retracting fully.

there is minor movement in the rear wheel bearings or swinging arm bearings.

Headlamp aim too high (1.6)