MOT Status
ExpiredMileage
146,089 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Battery insecure (1.9.1)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside rear brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
front brake application uneven (3.7.B.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside rear brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside rear brake binding (3.7.B.1)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake binding (3.7.B.1)
both rear spring front and rear hanger brackets getting corroded
both top strut mounts getting corroded and worn
brake pipe to nearside rear cylinder getting corroded
brake pipes to nearside front caliper getting corroded
front chassis crossmember getting corroded
front discs getting corroded and pitted
front suspension arm bushes getting worn
metal part of front and rear flexes getting corroded
offside front tyre close to wear bands
rear shockers getting corroded
small chip offside windscreen
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
both rear spring front and rear hanger brackets getting corroded
both top strut mounts getting corroded and worn
brake pipe to nearside rear cylinder getting corroded
brake pipes to nearside front caliper getting corroded
front chassis crossmember getting corroded
front discs getting corroded and pitted
front suspension arm bushes getting worn
metal part of front and rear flexes getting corroded
offside rear tyre close to wear bands
rear shockers getting corroded
small chip offside windscreen
Nearside Headlamp aim too low (1.8)
Nearside rear brake binding (3.7.B.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear brake binding (3.7.B.1)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside front brake juddering slightly (3.7.A.2b)
Nearside rear brake grabbing slightly (3.7.A.5b)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear wheel bearing has slight play (2.6.2)
Offside rear brake grabbing slightly (3.7.A.5b)
battery insecure and leaking
nearside front brake disc inner face badly corroded
Centre Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear rear brake binding (3.7.B.1)
Offside Rear rear brake binding (3.7.B.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Please note: slight play in o/s and n/s front w/bearings.
Brake performance not tested (3.7.A.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe leaking (3.6.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
please note: n/s rear tyre walls perrished slightly.
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M102 TVN is a 1995 Peugeot Boxer in White with a 2,446cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 1995 Peugeot Boxer models, the average MOT pass rate is 66.9% with a typical mileage of 65,657 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying M102 TVN, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 31 years old, this Peugeot Boxer is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M102 TVN?
You can check the full history of M102 TVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M102 TVN registered?
M102 TVN is a 1995 Peugeot Boxer, first registered on 15 June 1995.
Is M102 TVN safe to buy?
The MOT history for M102 TVN shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M102 TVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M102 TVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.