1995 Rover Mini

Brake pedal anti-slip provision missing (1.1.2 (c))

Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Rear Shock absorbers insecurely attached (5.3.2 (a) (i))

Nearside Rear Suspension arm insecurely attached radius arm (5.3.3 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Registration plate does not conform to the specified requirements front and rear (0.1 (d))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front offside floor corroded and holed but not within a prescribed area

Steering component mounting prescribed area is corroded but not considered excessive nearside and offside front floors (2.1.2 (e) (i))

front bump stops missing

front subframe rear mount starting to split

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Seat belt buckle not functioning as intended dose not fasten in to stark (7.1.2 (d))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a))

Direction indicators not working (1.4.A.2c)

Driver's seat insecure (6.2.A.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake pipe excessively corroded under wing (3.6.B.2c)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement pair mounting (2.4.G.2)

Nearside Front Tyre has ply or cords exposed on wall (4.1.D.1b)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded floor to under body (5.2.6)

Nearside Rear Sub-frame attachment attachment bracket inappropriately repaired valance around mounting (2.4.A.2)

Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Rear Sub-frame inappropriately repaired (2.4.A.2)

Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded upper bulk head under front wing (2.4.A.3)

Offside Rear Rear fog lamp missing (1.3.2a)

Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Rear Sub-frame inappropriately repaired (2.4.A.2)

Offside Rear Subframe mounting prescribed area is excessively corroded back mounting under wing (2.4.A.3)

Offside rear parking brake recording little or no effort reading 0 (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Passenger's seat insecure (6.2.A.1)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) not correctly formed (6.3.4b)

Statutory seat belt of the wrong type. front have no kite markings (5.1.1)

Fuel pipe/s corroded

Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Oil leak

Rear Body has slight corrosion (6.1.B.2)

heavily undersealed

Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Offside Brake pipe fouled by moving parts (3.6.B.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Coolant leak

Nearside Front wheel bearing has slight play (2.5.A.3c)

movement in seat mountings

Brake pipe excessively corroded (3.6.B.2c)

Driver's seat insecure (6.2.A.1)

Front passenger seat insecure (6.2.3)

Front position lamp(s) not working (1.1.A.3b)

Nearside Front Sub-frame attachment bracket/mounting nut missing (2.4.G.1)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Statutory seat belt missing (5.1.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Direction indicators not working (1.4.A.2c)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Emissions not tested (7.0)

Front passenger seat cannot be secured in the upright position. (6.2.4)

Horn not working (1.6.2a)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Sub-frame cracked (2.4.G.1)

Nearside Headlamp aim too low (1.8)

Offside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too far to the left (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Exhaust noisy (7.1.4)

Nearside Front Tie bar/rod slightly distorted (2.4.G.1)

exhaust fouling heat sheild

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)