2008 Mazda Bongo

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear d bushes (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing 2156515 (5.2.3 (d) (ii))

Nearside Front headlamp lens deteriorated

Offside Front Tyre slightly damaged/cracking or perishing 2156515 (5.2.3 (d) (ii))

Suspension component mounting repair covered in underseal all previous welded repairs (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear most valance and cross member both rear outriggers and paneling (6.1.1 (c) (i))

chassis and underbody corroded and repairs coated in underseal

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and outrigger assy (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear d bushes (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing 2156515 (5.2.3 (d) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front headlamp lens deteriorated

Offside Front Tyre slightly damaged/cracking or perishing 2156515 (5.2.3 (d) (ii))

Suspension component mounting repair covered in underseal all previous welded repairs (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear most valance and cross member both rear outriggers and paneling (6.1.1 (c) (i))

chassis and underbody corroded and repairs coated in underseal

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Headlamp reflector slightly defective deteriorated (4.1.1 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner skirting panels (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced nearside rear lower inner skirting panels (6.1.1 (c) (i))

previous welded repairs are coated in underseal

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

all welded repairs are coated in thick underseal

nearside front headlamp lens deteriorated

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

all corrosion welded repairs are coated in thick underseal

nearside washer jet inop

Horn not working (7.7 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

all corrosion welded repairs are coated in thick underseal

nearside washer jet inop

Brake disc worn, pitted or scored, but not seriously weakened both rear brake discs are corroded (1.1.14 (a) (ii))

chassis and prescribed areas are coated in thick underseal making welded repair assessment difficult

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside inner sill section (2 places) (5.3.6 (a) (i))

Suspension component mounting prescribed area is inadequately repaired nearside front inner sill repair welding is incomplete visable through underseal (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear discs on friction surfaces (1.1.14 (a) (ii))

Suspension component mounting repair covered in underseal all previous repairs and most of the under body panels are coated in thick under seal making proper assessment difficult (5.3.6 (a) (i))

both front inner wheel arches under headlamp mounting are corroded and hole outwith prescribed area

offside inner sill section corroded and hole outwith any prescribed area

radiator support cross member corroded and weak

Coil spring corroded both rear (5.3.1 (b) (i))

Suspension component mounting repair covered in underseal all welded repairs and body work (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced around both front headlamp panels (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Power steering component leaking steering rack (2.1.5 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

both front inner wings/arches corroded to excess at headlamp panel

underbody coated in thick underseal and previous repairs coated in underseal

signs of power steering leak no drip detected at time of test

underside of car coated in under seal

brakes binding slightly

front cross member heavily corroded

nearside front washer inop

Battery insecure (1.9.1)

Fuel tank insecure (7.2.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

brakes binding slightly

front cross member heavily corroded

nearside front washer inop

underside of car coated in under seal

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded box section & inner sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Suspension component mounting prescribed area is excessively corroded Both front box sections & both front inner sills (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded Both front inner wings (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively Both front (8.2.2)

Both outer sills corroded

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear fog lamp tell tale not working (1.3.1b)