2001 Honda S2000

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Steering linkage ball joint has slight play (2.1.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Front Play in steering rack inner joint(s) both

Fuel Pipe/s corroded

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

general corrosion underneath

Brake disc worn, but not excessively all 4 inner (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material all 4 (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced both inner sills area (6.1.1 (c) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Inner wheel arch corroded

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

vehicle has general rust and corrosion underneath overall

Fuel system component leaking (6.1.3 (b) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake disc worn, but not excessively all 4 inner (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material all 4 (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced both inner sills area (6.1.1 (c) (i))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Inner wheel arch corroded

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

vehicle has general rust and corrosion underneath overall

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

General under body corrosion

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear (2.4.G.2)

Offside Front Play in steering rack inner joint(s)

front brake fluctuating, but not excessively (3.7.B.3)

rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Registration plate lamp not working (1.1.C.1d)

Rear fog lamp not working (1.3.2b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

General under body corrosion

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear (2.4.G.2)

Offside Front Play in steering rack inner joint(s)

front brake fluctuating, but not excessively (3.7.B.3)

rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

underside of vehicle corroded in and around prescribed areas

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust noisy

non standard suspension fitted

Front Brake Disc's slightly corroded

Nearside Front wheel arch liner missing

Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

N/S REAR TYRE ON 2mm.

O/S REAR TYRE ON 1.6mm.