1994 Fiat Ducato

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure (6.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear subframe mount cracked (5.3.6 (a) (i))

Offside Rear Brake cable guide defective and affecting operation handbrake mount badly bent and corroded (1.1.15 (d))

Side repeater not working both sides (4.4.1 (a) (ii))

Body component likely to become detached both rear landing legs (6.2.1 (a) (ii)) DANGEROUS

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner arches (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing all tyres age and perishing (5.2.3 (d) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure 2 x rubbers missing (6.1.2 (a))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by shock mount (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Subframe mounting prescribed area excessively corroded significantly reducing structural strength both sides subframe prescribed area (5.3.6 (a) (i))

Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing all tyres age and perishing (5.2.3 (d) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

Front Registration plate inscription illegible (0.1 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger / subframe (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg/crossmember mount (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/back panel (6.1.1 (c) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front shock mounts holed (5.3.6 (a) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule x1 (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail engine bay (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear subframe mount (5.3.6 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear subframe mount (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule x1 (1.1.12 (f) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail engine bay (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive and offside front chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive and offside front chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front cross member (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipe leaking on a hydraulic braking system front to rear and excessively corroded (1.1.11 (b) (ii)) DANGEROUS

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive and offside front chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive and offside front chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake hose has slight corrosion to ferrule both o/s/f (1.1.12 (f) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch corroded (5.3.6 (a) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch corroded (5.3.6 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

front cross member corroded

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ lower step (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Power steering pipe/hose excessively corroded pipe going to rack excessively corroded and leaking (2.1.5 (g) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule both o/s/f (1.1.12 (f) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch corroded (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch corroded (5.3.6 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

front cross member corroded

Front crossmember corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Nearside Rear Leaf spring corroded

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Offside Front Tyre worn close to the legal limit Inner edge (4.1.E.1)

Offside Rear Leaf spring corroded

Offside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

front crossmember corroded outside of prescribed area

slight bind o/s/r

slight corroison on chassis

vehicle heavily undersealed

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Front coil spring corroded (2.4.C.1b)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Play in steering rack inner joint(s)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Brake performance not tested (3.7.A.1)

Offside Outer Front Braking system leaking (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

In my opinion due to the long rear overhang on this vehicle the rear ride height is too low

Nearside Front coil spring corroded (2.4.C.1b)

Unable to fully examine brake pipes/underside of vehicle painted

Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Offside Rear coil spring fractured (2.4.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front coil spring corroded (2.4.C.1b)

Unable to fully examine brake pipes/underside of vehicle painted

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Unable to fully examine underside of vehicle or brake pipes partially covered in underseal

Nearside rear brake binding (3.7.B.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Unable to fully examine underside of vehicle or brake pipes partially covered in underseal

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/r brake binding slightly

o/s/f brake ferrules corrosion and rear

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s/f and n/s/r brake flexi ferrules corrosion

ovality n/s/r brake drum.o/s/r?

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

brake flexies ferrule joint corroded o/s/f and at rear