1994 Toyota Land Cruiser

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Towbar component corroded, but not excessively mounting area (6.1.6 (a))

Oil leak, but not excessive both front hub seals leaking contamination on brake backing plates (8.4.1 (a) (i))

unable to check rear seat bels as seats folded down

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps on spare wheel (4.7.1 (b) (ii))

Offside Front Body component likely to become detached under front or arch liner corroded body mount area (6.2.1 (a) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Towbar component corroded, but not excessively mounting area (6.1.6 (a))

Oil leak, but not excessive both front hub seals leaking contamination on brake backing plates (8.4.1 (a) (i))

unable to check rear seat bels as seats folded down

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Towbar component corroded, but not excessively (6.1.6 (a))

Nearside Front Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Offside Rear Towbar component corroded, but not excessively fixing bolts to chassis corroded (6.1.6 (a))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Body mounting inner sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body mounting inner sill (6.2.2 (d) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Both front hub seals leaking

Brake master cylinder/servo mounting prescribed area is excessively corroded ABS pump (3.6.C.3)

Offside Front Steering component mounting prescribed area is excessively corroded Inner wing area (2.2.C.1h)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Both front hub seals leaking

Battery insecure Both nearside batteries (1.9.1)

Exhaust system not adequately supported Rear exhaust mounting broken (7.1.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Electrical wiring insecure Abs lead rubbing brake hose (1.9.2a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear fog lamp obscured more than 50% Fog lamp obscured by spare wheel (1.3.2c)

Both front hub seals leaking

Offside Rear fog lamp obscured more than 50% (1.3.2c)

spare wheel not fitted at time of test,if fitted may obstruct fog lamp

Rear fog lamp not working (1.3.2b)

spare wheel not fitted at time of test,if fitted may obstruct fog lamp

Direction indicators not working (1.4.A.2c)

Hazard warning switch faulty (1.4.B.1d)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Rear fog lamp not working (1.3.2b)

Rear passenger seat cannot be secured in the upright position. (6.2.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)