2004 Subaru Impreza

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement forward most (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Sub-frame corroded but not seriously weakened rear (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Sub-frame corroded but not seriously weakened rear (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated and slight movement (5.3.4 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated leak of grease (6.1.7 (g) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated leak of grease (6.1.7 (g) (i))

sill covers

Emissions oxygen sensor missing where one was fitted as standard (8.2.1.1 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated and slight movement (5.3.4 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated leak of grease (6.1.7 (g) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated leak of grease (6.1.7 (g) (i))

sill covers

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

n/s and o/s inner cv boot slight leak of grease

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

n/s and o/s inner cv boot slight leak of grease

Exhaust noisy (8.1.1 (a))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

sill covers fitted

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

sill covers fitted

Exhaust noisy (8.1.1 (a))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

EML Illuminated indicating a fault

Front Brake pad(s) wearing thin (3.5.1g)

after-market exhaust system fitted (noise level on limit)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust standard fitment from factory givern general noise

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Brake pad(s) wearing thin (3.5.1g)

both front brake discs rusty corroded

exhaust standard fitment from factory

Offside Registration plate lamp not working (1.1.C.1d)

front disc's worn

front number plate cracked slightly

front disc's worn

front number plate cracked slightly

Coolant leak