1995 Honda Civic

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Coil spring corroded both front springs corroded (coilovers) (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened both rear arms corroded (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Coil spring corroded both front springs corroded (coilovers) (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened both rear arms corroded (5.3.3 (b) (i))

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Rear Additional braking device wiring not secure (3.6.I.5)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Central Exhaust system not adequately supported (7.1.1)

Central Front Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Bonded suspension unit attachment loose TRAILING ARM BUSH ADRIFT (2.4.F.1a)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Front tyres wearing on inner edge.

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Front tyres wearing on inner edge.

cannot open rear hatch.

Front exhaust flange corroded

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

advise sill covers fitted

coil spring corroded (2.4.C.1b)

corrosion to both rearwing/wheel arch areas

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise outer sill covers fitted

coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

strong advise centre exhaust corroded and weak

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

strong advise centre exhaust corroded and weak

strong advise front brake discs corroded and pitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)