2007 Mazda Bongo

Fuel system component leaking (6.1.3 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement both d bushes worn (5.3.4 (a) (i))

Rear p-brake lever has travel still operates as should requires adjustment/replacement

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 5 sections as marked (6.2.2 (d) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement both d bushes worn (5.3.4 (a) (i))

Rear p-brake lever has travel still operates as should requires adjustment/replacement

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Inner Body has slight corrosion sill area (6.1.B.2)

Offside Rear Anti-roll bar has slight play in a pin/bush d bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Centre Statutory seat belt missing centre row (5.1.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Direction indicator insecure (1.4.A.2b)

Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Statutory seat belt missing centre row (5.1.1)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Statutory seat belt missing centre row (5.1.1)

Centre Inner Subframe mounting prescribed area is corroded but not considered excessive centre sill (2.4.A.3)

Nearside Front worn on inside edge

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Nearside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear fog lamp emits a light other than red (1.3.2e)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Rear fog lamp missing (1.3.2a)

Rear fog lamp switch missing (1.3.1a)

nail nearside front tyre

offside front tyre worn close to limits

play in both front anti-roll bar drop links

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

driver front wheel has crack and is perished

Nearside rear tyre cut in sidewall not down to cords

Emissions not tested (7.0)

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced (2.4.G.1)

Offside Rear Registration plate lamp not working (1.1.5c)

Coolant leak

Nearside rear tyre cut in sidewall not down to cords