MOT Status
ValidMileage
104,940 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Standard fitment seat belt missing Replaced with harnesses ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Passenger seat(s) missing at time of test ()
Sump and tank guard fitted restricting full inspection
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
symp guard fitted and unable to see front subframe
Manufactures engine and body covers fitted restricting full inspection
Underside coated in wax oil/ under seal restricting full inspection of body chassis brake pipes and suspension components
full competition car rally
full competition car
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M22 TGH is a 1998 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 82.4%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying M22 TGH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M22 TGH?
You can check the full history of M22 TGH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M22 TGH registered?
M22 TGH is a 1998 Ford Ka, first registered on 27 March 1998.
Is M22 TGH safe to buy?
The MOT history for M22 TGH shows 17 tests with a 82.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M22 TGH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M22 TGH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.