1995 Mazda Bongo

Oil leak, but not excessive (8.4.1 (a) (i))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger to rear crossmember (7.1.1 (a) (i))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar pin or bush likely to become detached D bush bracket snapped (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

parking brake long travel

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

slight noise poss manifold gasket minor leak

inner sills minor weld repairs

Nearside Service brake is causing the vehicle to swerve to the nearside (1.2.1 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

inner sills minor weld repairs

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced behind the bumper (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear crossmember (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced behind the bumper (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) DANGEROUS

Nearside Rear Anti-roll bar pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

vehicle rear bumper mounting panel heavily corroded.not within prescribed area.

Exhaust has a major leak of exhaust gases centre joint (6.1.2 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

vehicle rear bumper mounting panel heavily corroded.not within prescribed area.

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

All tyres starting to crack.

Nearside Front Inner sill corroded

Nearside Front Subframe mounting prescribed area is excessively corroded cross member (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Rear Inner sill corroded but not in an area of structual importance.

all tyres starting to crack

Offside front inner sill has corrosion but is outside an area of structual importance.

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too high (1.8)

Stop lamp not working (1.2.1b)

Offside front inner sill has corrosion but is outside an area of structual importance.

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Headlamp aim not tested (1.8.A.1c)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp missing (1.3.2a)