1995 Mazda Bongo

Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch liner (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Power steering component leaking steering rack pinion seal (2.1.5 (a))

Windscreen washer not working (3.5 (a))

Brake fluid warning lamp defective (1.1.10 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Electrical wiring insecure drivers footwell (4.11 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch liner corroded outside prescribed area (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

only rear seat is rear facing

Offside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

front and rear discs scored

oil seepage from steering rack

rear seat fitted the wrong way round

various body areas coroded

various suspension and braking components coroded

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

front and rear discs scored

oil seepage from steering rack

rear seat fitted the wrong way round

various body areas coroded

various suspension and braking components coroded

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Rear fog lamp not working (1.3.2b)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

underside of vehicle is undersealed

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) has slight seepage from a seal (2.3.3b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Power steering pipe(s) or hose(s) has slight seepage from a seal (2.3.3b)

battery insecure

Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)