MOT Status
ValidMileage
179,939 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Hydraulic leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
undercovers fitted
Hydraulic leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
undercovers fitted
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
corrosion on front subframe
Nearside Front Inner Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear cracking in tread
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear cracking in tread
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front brake disc worn, pitted or scored, but not seriously weakened inner face. (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Volvo XC60?
Based on 944,286 MOT tests across 100,002 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M321 CNC is a 2012 Volvo XC60 in Silver with a 2,400cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2012 Volvo XC60 models, the average MOT pass rate is 79.7% with a typical mileage of 81,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Volvo XC60 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 4,822 recorded failures. If you're considering buying M321 CNC, it's worth having these areas checked by a mechanic before committing.
The Volvo XC60 typically stays on UK roads for around 17 years. At 14 years old, this Volvo XC60 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M321 CNC?
You can check the full history of M321 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M321 CNC registered?
M321 CNC is a 2012 Volvo XC60, first registered on 16 June 2012.
Is M321 CNC safe to buy?
The MOT history for M321 CNC shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M321 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M321 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.