1994 Subaru 284 4WD Pick Up

Front Anti-roll bar pin or bush excessively worn both (5.3.4 (a) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Drag link end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure 175/70 r13 (5.2.3 (d) (ii)) DANGEROUS

Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii)) DANGEROUS

Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing 175/70 r13 (5.2.3 (d) (ii))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing 175/70 r13 (5.2.3 (d) (ii))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing 175/70 r13 (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Anti-roll bar pin or bush worn but not resulting in excessive movement both front outer (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive behind drivers seat (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

reverse lights not working

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch (6.2.2 (d) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement both front outer (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive behind drivers seat (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

reverse lights not working

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too high (1.8)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside rear brake application uneven low (3.7.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

front brake slight bind

vehicle heavily undersealed

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

slight play in steering rack

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

slight play in steering rack

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)