1994 Honda Vfr

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

bubbles / blisters on speedo affecting KM/H part of speed reading

Nearside Front foot peg bent

Offside Front fairing panel not fitted correctly

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

bubbles / blisters on speedo affecting KM/H part of speed

ignition switch difficult to get ignition on

main front fairing bracket looks bent / twisted when sat on bike

rear brake hose resting hard against exhaust heat shield behind right rider peg

rear brake hose resting on bolt head of torque are at rear caliper

screen not fitted correctly

throttle slightly slow to release due to adjustment on both left and right lock ( only on full lock )

wiring on right side slightly pulling on throttle cables when on left lock

Offside Lower screw for fairing lower missing as snapped in frame

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear brake hose incorrect routinf infront of rear wheel - rubbing on panel

Rear shock absorber corroded

ignition switch difficult to turn on ( need to turnn back slightly from on position to power on bike )

Front Brake excessively binding wheel stops on a high spot of discs (1.2.1 (f))

Rear Brake pedal is bent and the brake cannot be readily applied have to lift foot over bent part of pedal to apply rear brake (1.1.2 (d))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Steering headbearing has slight free play knock under heavy braking (2.2.2 (f) (i))

exhaust clamp underneath has rotted - no leak of exhaust gases

large oil leak from front of front rocker cover

left switch unit spins on handle bar