1995 Mazda MX-5

Exhaust mounting defective exhaust mount missing (6.1.2 (a))

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i))

Exhaust mounting defective exhaust mount missing (6.1.2 (a))

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Upper anti roll bar link bolt slightly loose

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (Slight corrosion jacking point) (6.1.1 (c) (i))

Offside Rear Upper Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (slight corrosion both rear inner sills) (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Upper anti roll bar link bolt slightly loose

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (Slight corrosion jacking point) (6.1.1 (c) (i))

Offside Rear Upper Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (slight corrosion both rear inner sills) (6.1.1 (c) (i))

Brake pedal wearing smooth (1.1.2 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Jacking point (6.1.1 (c) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust has a minor leak of exhaust gases centre exhuast (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge inner outer edges on limit now (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases at hanger (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

all 4 tyres are wearing on the edges & perishing

corrosion to offside inner sill area's

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush drop link (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area's (2.4.A.3)

front heat shield is loose

Front Brake pad(s) wearing thin nearside and offside (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear outer sill areas corroding

Offside Rear outer sill areas corroding

Parking brake lever has little reserve travel (3.1.6b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Spots of corrosion beneath the vehicle

Under-trays fitted obscuring some underside components

Offside Front position lamp(s) not working (1.1.A.3b)

both rear discs slightly scored

front pads wearing thin

both rear discs slightly scored

front pads wearing thin

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)