MOT Status
ExpiredMileage
102,328 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
thick underseal to underside of vehicle
Emissions unable to be completed (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
thick underseal to underside of vehicle
Exhaust has a minor leak of exhaust gases also exhaust corroded (6.1.2 (a))
brake pipes corroded
rear brakes only just made effort
underbody and suspension corroded,some areas weak
underbody,sills and inner wheel arches had lots of welding repairs
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at floor (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at inner wheel arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at inner wheel arch (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material all metal bake pipes (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive at floor (5.3.6 (a) (i))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to rear (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to front (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at boot (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to rear (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to front (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at boot (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
inner sills corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
metal brake pipes corroded
outer and inner sills corroded
rear brake efficiency poor
Nearside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Steering rack gaiter split (2.2.D.2d)
metal brake pipes corroded
outer and inner sills corroded
rear brake efficiency poor
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Exhaust mounting missing (7.1.1b)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Front brake disc excessively pitted (3.5.1h)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
How Reliable is the Ford Probe?
Based on 68,773 MOT tests across 11,550 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M415 BMA is a 1995 Ford Probe in Black with a 2,497cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 1995 Ford Probe models, the average MOT pass rate is 63.1% with a typical mileage of 95,968 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Probe fails its MOT is constant velocity joint gaiter split, accounting for 6,655 recorded failures. If you're considering buying M415 BMA, it's worth having these areas checked by a mechanic before committing.
The Ford Probe typically stays on UK roads for around 32 years. At 31 years old, this Ford Probe is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M415 BMA?
You can check the full history of M415 BMA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M415 BMA registered?
M415 BMA is a 1995 Ford Probe, first registered on 31 December 1995.
Is M415 BMA safe to buy?
The MOT history for M415 BMA shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M415 BMA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M415 BMA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.