MOT Status
ExpiredMileage
82,941 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front suspension arm bushes perished
OS headlight chipped
Rear Shock absorber has a light misting of oil both (2.7.3)
Rear springs corroded
Rear tyres perished
Slight corrosion on front cross member
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Driver's seat insecure (6.2.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Rear Exhaust system not adequately supported (7.1.1)
Front suspension arm bushes perished
OS headlight chipped
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Shock absorber has a light misting of oil both (2.7.3)
Rear springs corroded
Rear tyres perished
Slight corrosion on front cross member
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
rear wiper split
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
rear wiper split
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high and too far to the left. (1.8)
Rear Exhaust system not adequately supported (7.1.1)
Service brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
gearbox mount badly worn
Exhaust system not adequately supported (7.1.1)
Horn not working (1.6.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Horn not working (1.6.2a)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust mounting missing
o/s outer sill corroded
rear tyres perished
Fuel system component insecure (7.2.1)
Horn not working (1.6.2a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust mounting missing
o/s outer sill corroded
rear tyres perished
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
NEARSIDE AND OFFSIDE FRONT READIIS ARM INER BUSHES CRACKED., OFFSIDE REAR TYRE SOME OUTSIDE WALL SOME CRACKED
Nearside outer track rod end joint cover split/missing
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
EXHAUST REPEARD WITH PAST
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M416 KVC is a 1995 Fiat Panda in Blue with a 1,108cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 1995 Fiat Panda models, the average MOT pass rate is 62.7% with a typical mileage of 56,026 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying M416 KVC, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 31 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M416 KVC?
You can check the full history of M416 KVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M416 KVC registered?
M416 KVC is a 1995 Fiat Panda, first registered on 1 May 1995.
Is M416 KVC safe to buy?
The MOT history for M416 KVC shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M416 KVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M416 KVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.