1994 Land Rover Defender

Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake fluid warning lamp illuminated (1.1.10 (f))

Exhaust has a minor leak of exhaust gases Manifold (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Axle pipe (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner wing (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Axle pipe (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Oil leak, but not excessive Rear diff front seal (8.4.1 (a) (i))

Steering wheel quick release has play

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Exhaust has a minor leak of exhaust gases Manifold (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Axle pipe (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner wing (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Axle pipe (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Oil leak, but not excessive Rear diff front seal (8.4.1 (a) (i))

Steering wheel quick release has play

Front Oil leak Axle drive flange ()

Front Propshaft universal joint worn Front prop rear UJ ()

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak Sump ()

Rear Oil leak Axle drive flange ()

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust has a major leak of exhaust gases centre (7.1.2)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Direction indicator not working (1.4.A.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Oil leak Axle drive flange ()

Front Propshaft universal joint worn Front prop rear UJ ()

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak Sump ()

Rear Oil leak Axle drive flange ()

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded front to rear (3.6.B.2c)

Rear Brake pipe slightly corroded across axel (3.6.B.2c)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded front to rear (3.6.B.2c)

Rear Brake pipe slightly corroded across axel (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Battery box is corroded.

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Nearside body mounting excessivly corroded.

Offside body mounting is excessivly corroded

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel tank rear support is excessivly corroded but not insecure at time of test.

Steering box has a slight oil leak (2.2.D.2e)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake application uneven (3.7.B.2)

Fuel tank rear support is excessivly corroded but not insecure at time of test.

Steering box has a slight oil leak (2.2.D.2e)

Nearside rear brake recording little or no effort (3.7.B.5a)

rear brake application uneven (3.7.B.2)

Propshaft component defective

Oil leak

There is slight play in front prop shaft U.J.

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Service brake: efficiency below requirements (3.7.B.7)