1994 Rover Mini

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor area (7.1.1 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor area (7.1.1 (a) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear subframe mount (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor area (7.1.1 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Driver's seat with a defective structure (6.2.5 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks fuel tank (4.11 (c) (iii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

slight engine oil leak

surface corrosion to front and rear suspension components

vehicle has been stood

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

slight engine oil leak

surface corrosion to front and rear suspension components

vehicle has been stood

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

surface corrosion to front and rear suspension components

vehicle has been stood

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

surface corrosion to front and rear suspension components

vehicle has been stood

vehicle has been stood

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle has been stood

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle has been stood.

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle has been stood.

Nearside Front Bump Stop Missing

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Wheel Arch Inner Holed By Corrosion.

Steering column top bearing slightly worn (2.1.2c)

Brake pipe slightly corroded (3.6.B.2c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear All position lamps not working (1.1.A.3b)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

corrosion on under side of vehicle.

Brake pipe slightly corroded (3.6.B.2c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

corrosion on under side of vehicle.

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside rear brake binding (3.7.B.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Steering column top bearing excessively worn (2.1.2c)

front brake application uneven (3.7.B.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle has been stood for sometime.

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

floor at nearside front getting weak with corrosion

metal brake pipes getting corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

metal brake pipes getting corroded

steering column bushes slight play

Windscreen washer provides insufficient washer liquid (8.2.3)

steering column bushes slight play

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Steering column top bearing slightly worn (2.1.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Body has slight corrosion (6.1.B.2)

Steering column top bearing slightly worn (2.1.2c)

Front passenger seat insecure (6.2.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Body has slight corrosion (6.1.B.2)

Steering column top bearing slightly worn (2.1.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Centre Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both outer sills heavily corroded o/s holed at front not in prescribed area

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)