1994 Honda CBR600F

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Throttle operating incorrectly Sticking on full lock (6.2.7 (a) (i))

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Fairing pannel loose

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Throttle operating incorrectly Throttle sticks on full lock (6.2.7 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Drive chain excessively loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Drive chain worn to excess (6.2.1e) DANGEROUS

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)

Drive chain worn to excess (6.2.1e) DANGEROUS

Rear Drive chain sprocket worn to excess (6.2.1e) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))