1995 Ford Transit

Rear Tyre worn close to the legal limit (4.1.E.1)

slight noise from rear wheels when spun possible diff

some general corrosion on undewrside not within failure criteria

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Nearside Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Passenger's seat insecure (6.2.A.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

slight noise from rear wheels when spun possible diff

some general corrosion on undewrside not within failure criteria

Battery insecure

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

Propshaft component defective

nearside rear wheel bearing slight noise

rear leave springs bottom leaves starting to twist

slight movement in front arb d bushes

surface corrosion to nearside + offside front + rear cross member

surface corrosion to nearside + offside front inner wheel arches

surface corrosion too nearside + offside front inner sill

surface corrosion too nearside + offside rear cross member + box sections

surface corrosion too nearside front outer wing + wheel arch

Brake pedal creeps down when held under pressure (3.3.B.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Battery insecure

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

Propshaft component defective

nearside rear wheel bearing slight noise

rear leave springs bottom leaves starting to twist

slight movement in front arb d bushes

surface corrosion to nearside + offside front + rear cross member

surface corrosion to nearside + offside front inner wheel arches

surface corrosion too nearside + offside front inner sill

surface corrosion too nearside + offside rear cross member + box sections

surface corrosion too nearside front outer wing + wheel arch

Battery insecure

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Oil leak

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

slight movement in front steering rack

surface corrosion + slight damage to nearside + offside rear cross member to chassis rails

surface corrosion to offside front outer sill

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Track rod end loose (2.2.B.1d)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Headlamp aim too high (1.8)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Battery insecure

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Oil leak

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

slight movement in front steering rack

surface corrosion + slight damage to nearside + offside rear cross member to chassis rails

surface corrosion to offside front outer sill

advisories as before vt32

Centre Rear Parking brake mechanism/associated mounting prescribed area is fractured (3.1.9)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Battery insecure

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front mirror backing plates missing no sharp edges

Body has a sharp edge caused by corrosion (6.1.C.1)

Body has a sharp edge caused by corrosion (6.1.C.1)

Body insecure and dangerous to other road users (6.1.B.1b)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)

Offside Rear fog lamp not working (1.3.2b)

Parking brake lever, pawl mechanism pivot(s) retaining device insecure (3.1.4b)

Rear Brake pipe inadequately clipped (3.6.B.1)

Rear Exhaust has a part missing (7.1.1a)

Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance (1.3.2d)

battery insecure

fuel tank damp

nearside + offside front discs getting low

oil leak

rear most centre propshaft bearing worn

surface corrosion too rear crossmember